This one-piece extruded EPDM seal creates a watertight seal when used with high-strength epoxy adhesive.
The serrated edges create epoxy reservoirs and improve adhesion to joint walls.
The closed cell design allows the system to achieve ± 50% movement capability.
Series Details
- Joint Width: up to 100mm
- Horizontal: up to ±50mm
- Vertical: up to ±10mm
- Lateral: up to ±15mm
Movement Details
FLOOR TO FLOOR / FLOOR TO WALL SEALS:
To order any of the below models, please call +44 (0)1296 652800
| Model | Rapid Ship? | Joint Width (mm) | Exposed Surface (mm) | Min. Joint Depth (mm) | Horizontal Movement (mm) | Vertical Movement (mm) | Lateral Movement (mm) |
|---|---|---|---|---|---|---|---|
| HB-200 | NO | 50 | 50 | 78 | ±25 | ±10 | ±10 |
| HB-300 | NO | 75 | 75 | 78 | ±38 | ±10 | ±10 |
| HB-400 | NO | 100 | 100 | 104 | ±50 | ±10 | ±15 |
Materials, Colours & Finishes
EPDM elastomeric seal available in Black as standard.
Fixings
Installed using high-strength epoxy adhesive (supplied by CS).
Note: The standard adhesive used with HB models is not compatible with bituminous finishes, such as asphalt. Please contact us for alternative solutions.
Note: To ensure successful installation of the system, the substrate temperature at the time of installation should be 5°C or above.
Stock Lengths
Supplied cut to suit from [max] 7.5m or 15m rolls.
Accessories
*contact us for details
This one-piece extruded EPDM seal creates a watertight seal when used with high-strength epoxy adhesive.
The serrated edges create epoxy reservoirs and improve adhesion to joint walls.
The closed cell design allows the system to achieve ± 50% movement capability.
Series Details:
- Joint Width: up to 100mm
- Horizontal: up to ±50mm
- Vertical: up to ±10mm
- Lateral: up to ±10mm
| Model | Joint Width (mm) | Overall Profile Width (mm) | Exposed Surface (mm) | Seal Width before Installation | Joint Height (mm) | Horizontal (mm) | Vertical (mm) | Lateral (mm) |
|---|---|---|---|---|---|---|---|---|
| HB 50 | 50 | 50 | 50 | 76 | 63.5 | 22 / + 25 | ± 10 | ± 10 |
| HB 75 | 75 | 75 | 75 | 114 | 63.5 | 35 / + 39 | ± 10 | ± 10 |
| HB 100 | 100 | 100 | 100 | 152 | 89 | ± 50 | ± 10 | ± 10 |
See how this joint cover works
This one-piece extruded EPDM seal creates a watertight seal when used with high-strength epoxy adhesive.
The serrated edges create epoxy reservoirs and improve adhesion to joint walls.
The closed cell design allows the system to achieve ± 50% movement capability.
Series Details:
- Joint Width: up to 100mm
- Horizontal: up to ±50mm
- Vertical: up to ±10mm
- Lateral: up to ±10mm
| Model | Szerokość szczeliny dylatacyjnej (mm) | Całkowita szerokość listwy dylatacyjnej (mm) | Powierzchnia widoczna (mm) | Szerokość uszczelki (mm) | Wysokość listwy dylatacyjnej (mm) | Przesunięcie (mm) | Klasa obciążeń |
|---|---|---|---|---|---|---|---|
| HB 50 | 50 | 50 | 50 | 76 | 63.5 | — 22 / + 25 | 3 |
| HB 75 | 75 | 75 | 75 | 114 | 63.5 | — 35 / + 39 | 3 |
| HB 100 | 100 | 100 | 100 | 152 | 89 | ± 50 | 3 |
This one-piece extruded EPDM seal creates a watertight seal when used with high-strength epoxy adhesive.
The serrated edges create epoxy reservoirs and improve adhesion to joint walls.
The closed cell design allows the system to achieve ± 50% movement capability.
Series Details:
- Joint Width: up to 100mm
- Horizontal: up to ±50mm
- Vertical: up to ±10mm
- Lateral: up to ±10mm
| MODEL | JOINT WIDTH | MINIMUM OPENING | MAXIMUM OPENING | EXPOSED SURFACE | BLOCKOUT WIDTH | BLOCKOUT HEIGHT | SEAL DEPTH |
|---|---|---|---|---|---|---|---|
| HB-100 | 1.00" (25mm) | 0.50" (13mm) | 1.50" (38mm) | 1.00" (25mm) | N/A | N/A | 2.25" (57mm) |
| HB-200 | 2.00" (51mm) | 1.00" (25mm) | 3.00" (76mm) | 2.00" (51mm) | N/A | N/A | 2.50" (64mm) |
| HB-300 | 3.00" (76mm) | 1.50" (38mm) | 4.50" (114mm) | 3.00" (76mm) | N/A | N/A | 2.50" (64mm) |
| HB-400 | 4.00" (102mm) | 2.00" (51mm) | 6.00" (152mm) | 4.00" (102mm) | N/A | N/A | 3.50" (89mm) |
